Configuracion Marantz SR7500

Nadie puede ayudarme ??

Suiguiendo este procedimiento

The SR7500 incorporates an on-screen menu
system, which makes various operations possible
by using the cursor ( <>^V ) and ENTER
buttons on the remote control or on the front panel.
Note:
• To view the on-screen displays, make certain you
have made a connection from the [b]Monitor Out jack
on the rear panel to the composite, S-Video,
component video input of your TV or projector.
(see page 14)
1.
Press the AMP button of the remote control.
This step is not needed when operating the
setup menus from the receiver itself.)
2.
Press the MENU button on the remote control
or set to display the “SETUP MAIN MENU” of
the OSD menu system.
There are 8 items in the SETUP MAIN MENU.
3.
Select a desired sub-menu with the ^or V
cursor buttons, and press the ENTER button
to enter. The display will change to the
selected sub-menu. You can lock the
condition of setup to each sub-menu with the
or < or > cursor buttons.
4.

sólo con las salidas vídeo compuesto o s-vídeo 'Monitor out'

MONITOR OUT
These are monitor outputs and each one includes
both composite video and S-video configurations.
When connecting two video monitors or televisions,
be aware that the OSD interface can be used with
both MONITOR OUT connections.

que deberás conectar a tu pantalla para ver los menús.

Respecto a configuración de los altavoces ni idea. :-[

Problema con puntas de goma no. Los subs pequeños - incluidos REL - suelen llevarlos para no marcar el suelo al moverlo. Úsalas a ver si para quieto el condenádor.

Un saludo.

PD: Manuales Marantz:

http://www.marantz.com/pdfs/