Subwoofers: HI-FI Vs. Pro

Pues por el precio de los focal ya podrían haberse esforzado más, creo yo, leyendo las especificaciones.

A ver que os parecen estas especificaciones para un sub de menos de 500 lauros y para una sala mediana:
Cono frontal de 12’ en recinto cerrado ampli. de 200 W RMS. Respuesta en frecuencia a +- 2,5 db hasta 22Hz..

Todo tipo de conexiones, filtros pasabajos y pasaaltos ambos regulables, fase, etc


Especificaciones completas (en ingles, lo siento):

Technical Specifications
General
Type: front firing, acoustic suspension active reference subwoofer
Frequency Response: 22Hz~135Hz (±2.5dB), 30Hz - 100Hz (±1.5dB)
Maximum Sound Pressure Level, short term: =103dB SPL @1m @ 60Hz
Driver:
-Polymer-Laminated Cone with Butyl-rubber surround
-Long-throw with high temperature voice coil
-Size: 305mm (12")

Dimensions:
-Height: 385mm (15.1")
-Width: 362mm (14.2")
-Depth: 390mm (15.3")

Weight: 19.5kg (43lbs)
Power:
-Input Voltage: 100V-120V~50/60Hz Input Current: 2.5A
-Input Voltage: 220V-240V~50/60Hz Input Current: 1.25A
-Auto power-On/Standby (15-minute standby delay)

Fuse:
-100-120V: 2.5A/250V
-220-240V: 1.25A/250V


Connections: (2) Balanced Neutrik® Combination XLR/TRS Inputs
(2) Unbalanced RCA Inputs
(2) Balanced XLR Satellite Outputs
(2) Unbalanced RCA Satellite Outputs
(1) 3-pin power connector
(1) Subwoofer/Hi-Pass Filter Bypass Footswitch Input(Foot Switch not included)

Crossover Network: Sub-Sonic Rumble filter: 15Hz @ 12dB/octave
Low-Pass Filter(to subwoofer): Variable frequency Linkwitz-Riley 4th order (55Hz~135)
Hi-Pass Filter(to satellite outputs): Variable frequency Linkwitz-Riley 2nd order (40Hz~135Hz)
Input impedance
-Balanced: 20KOhms
-Unbalanced: 100KOhms

Amplifier: Type: custom discrete MOSFET
Power: 200W RMS into 4 ohms continuous
Signal-to-Noise Ratio, referred to full output: >102dB A-weighted
Distortion: THD <0.1%

Y encima no es feo











A ver quien da más por menos