Features & Benefits
Output
Power 150 Watts per channel into 8 Ohms (22dBW), 240 Watts per channel into 4 Ohms
Voltage, RMS 34 Volts 20Hz to 20kHz
Voltage, Peak-to-peak 96 Volts
Current peak-to-peak 50 Amps
Damping factor 142
Output devices per channel 4
Pre-out impedance 50 Ohms
Line inputs
Total harmonic distortion + noise < 0.01%, 20Hz to 20kHz
Signal / noise ratio > 100dB 'A'-weighted
Input sensitivity for 147 Watts into 8 Ohms 282mV
Input impedance 100k Ohms
Overload margin 26dB
Channel separation > 82dB typical
Frequency response 20Hz to 20kHz, +0, -0.1dB
General
Home Theatre direct input sensitivity 30dB gain (31.5 times) nominal
Inputs 5 pairs line level RCA connectors
1 pair direct power amplifier input RCA connectors for Home Theatre use (not controlled by volume adjustment)
Outputs 2 amplifier channels via 1 pair binding posts per channel
1 pair RCA audio outputs controlled by the volume
1 pair RCA tape record fixed line level output
Power requirement 100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set)
450 Watts maximum into 8 Ohms, 36 Watts idle
Weight 9.7 kg, 21.4 lbs unit only, unboxed
14.4 kg, 31.8 lbs in shipping carton
Dimensions 440 mm, 17.3 inches wide
100 mm, 3.9 inches high including feet
395 mm, 15.6 inches deep including terminals
Standard accessories IEC type mains lead (10-Amp type)
Remote control handset (A3.5 type, universal)
2 batteries size LR03 or AAA, manganese alkaline type
3.5mm stereo jack plug to two RCA plug audio lead (1metre) for accessory connection (iPod, MP3 etc.)