Note: Activation of the CSM is only possible if there is no (user)
menu on the screen!
selected preset.
– LTO (Local Time Offset). Extracted from the selected
How to navigate
preset.
By means of the 'CURSOR-DOWN/UP' knob on the RC-
transmitter you can navigate through the five menus.
– CNI (Country and Network Identification). Extracted
from the current preset (displayed as a four digit
hexadecimal number. The CNI number identifies the
broadcaster.
Contents of CSM
– NexTView service (optional). This item gives
Customer Service Menu 1
information about the type of NexTView service that is
available for the current preset. The possible strings
are:
1. NexTView provider.
2. NexTView data available from preset xx (where xx
• Software version (example: EM5EU1-1.0_01234).

• Brightness. Gives the las t status of the brightness as set
by the customer. The value can vary from 0 (brightness is
minimum) to 100 (brightness is maximum). Brightness
values can be changed v ia the 'CURSOR LEFT' and
'CURSOR RIGHT' keys on the RC-transmitter after
pressing the 'MENU' button and selecting 'PICTURE' and
'BRIGHTNESS'.
• Contrast. Gives the last status of the contrast as set by the customer. The value can vary from 0 (contrast is minimum)
to 100 (contrast is maximum). Contrast values can be
changed via 'CURSOR LEFT' and 'CURSOR RIGHT' keys
on the RC-transmitter after pressing the 'MENU' button and
selecting 'PICTURE' and 'CONTRAST'.
• Hue. Only relevant for NTSC-signals (e.g. some NTSC-DVD-discs)