Cita Iniciado por Capitanmorcilla Ver mensaje
Eso es falso desde el momento en que no citas todo el texto completo. TODAS las TV tienen una resolución en movimiento (entre comillas, es un convencionalismo) de +-300 líneas en movimiento usando el patrón. Aumentan a medida que usas un BFI, la técnica de Philips o un Strobe Backlight.

Veamos esa cita de "ojito" de la review:



¿Cambia la cosa cuando no cortas texto a propósito eh? Lo que dice Steve es que, como toooodas las TV, la resolución en movimiento es de 300-400 líneas PERO que activando el True Cinema AUMENTAN las líneas de resolución en movimiento SIN introducir efecto telenovela, ni pérdida de brillo ni absolutamente nada. Además añade que con ese aumento (650 líneas) no llega a los mejores LCD (1080 lineas), porque estos al tener un backlight pueden usar BFI sin problemas, la OLED no llega a 1080 líneas porque al activar el BFI hay perdida de brillo y flickering, pero aún así llega a 650 líneas presumiblemente, como la Philips. Para llegar a esas 1080 líneas en la Sony, hay que usar el TC+interpolador. EXACTAMENTE lo mismo dije yo hace un par de días. Pero bueno, lo pasarías por alto.
Ajam y dice esto:

We measured the motion resolution at around 400 lines which is about average for an OLED TV and obviously this increases to the full 1080 if you engage the Motionflow frame interpolation.
Vamos, que se saca las 650 lineas de la manga porque si, bien, bien...

Sobre el brillo, alcanza los +-750 nits en modo estándar y 900 en vívido. Exactamente lo mismo ocurría en la ZD9, que en modo Cinema pro los nits bajaban notablemente. Resulta que lo solucionaron con un firmware. Lo sé porque tuve una y lo medí con sonda, antes y después. Aquí parece que es exactamente igual. Me gustaría que me indicaras que OLED de 2016 llega a 900 nits, sea en el modo que sea. Medido con sonda, por favor.

Si tus argumentos van a ser no leer bien las fuentes o seccionar aquellos trozos que no te interesen...mal vamos. Y te permites el lujo además de llamar manipulador a otros

Un saludo.
En serio?:

Despite the fast response times of OLED panels they use a 'sample and hold' approach that results in motion that is more like an LCD TV than a plasma. Thankfully the motion handling on Sony TVs is very good and often one of the main reason that consumers choose their TVs, especially if they're football fans. We measured the motion resolution at around 400 lines which is about average for an OLED TV and obviously this increases to the full 1080 if you engage the Motionflow frame interpolation. This can introduce a certain degree of smoothing, although that won’t necessarily be an issue with sports content.
Eso me suena a que si hay cierto efecto SOE.

Y para rematarlo lo que decías antes de sin pérdida de brillo, ni SOE, ni NADA:

Y por favor, en serio se pone en Estándar o en Vívido? yo también la tengo más grande cuándo una y otra y otra review lo hacen CALIBRANDO en modo Cine, no tienes un certificado ISF?, deberías saberlo esto ehh? que los modos vivos y dinámicos no deben ponerse, nene malo , o faltaste ese día a clase de ISF?:

Whilst we would encourage experimentation with the Clear and Custom controls to find a setting that you prefer, it's worth pointing out that the Clear mode uses black frame insertion which will make the picture slightly darker, so you might need to increase the brightness of the image and some people may experience flicker. However when it comes to film-based content we would always recommend using the True Cinema mode which increases the frame rate without introducing interpolation, thus improving the motion whilst retaining a nice film-like quality.
Sin pérdida de brillo dice que si que hay, ligera, pero la hay, parpádeo de la imagen y Dices que NADA, no se yo eh... no estoy tan seguro.

Y por cierto, el tal Al ese de AVS dice lo siguiente:

Ok, I moved onto some UHD HDR 4k streaming content from Amazon video (Season 1 Episode 1 "Man in the High Castle"). The Flatpannels calibrations (with XDR on high) is still excellent except there might be a very tiny bit of judder with panning shots. Almost imperceptible. Setting "Cinemotion" to "Low" removes all Judder.
Si tus argumentos van a ser esos de ponerlo en modo Vivo o dinámico para obtener un chorro de luz y más nits o que se inventa lineas porque si y más cuándo te lo pone la misma review, te lo recuerdo? venga va, si :

We measured the motion resolution at around 400 lines
No se yo, pero si esos son los argumentos que muestras, a mi no me tienes que convencer .