lo consulte con la almohada y creoke repiterre cvon belek

kine da 500 w a 600 euros??kreoke voi a ntener la pareja de bk
y montarme un 4.2 con mi hk 3480

voi a tener ke instlarle un ventilador al ampli para ke refriguere.....alguien lo ha hehco alguna vez poner un ventilador a un amplificador para que se caliente menoss?

el bk slk2000 tb se calienta bastante,......recuerdo el dia ke me llego y lo teste....hervia!!!!!quemaba tocar solo uno de los conectores rca dorados....

bueno eso pk era le primer dia pero ayer mismo tb lo tenia ke kemaba...lo he tenido ke fijar al suelo con unas cinchas tensoras atornilladas al parket para eevitar bibraciones y eso que lo tengo sobre unos cojines de bolssitas desas de aire.......

lo dicho
Monolith-DF+ and Monolith+

The ultimate 500W 12" ported subwoofer offering an outstanding price versus performance ratio

Both versions have the same performance so choose the style that you like the best




UK£ 529.3 = 618.699092 euros

http://www.bkelec.com/HiFi/Sub_Woofe...th-DF+&FF+.htm

500 w 12 opulgadas 618
http://www.bkelec.com/HiFi/Sub_Woofe...th-df_Plus.htm

With a genuine in room response of 15Hz @ -3dB

Introduction:- The Monolith+ is the new upgraded version of our standard Monolith. The upgrade comprises of a 500W amplifier and a Lab 12 loudspeaker to give at least an extra +3dB SPL over the standard Monolith for those who require more from their subwoofer. The amplifier is a beefed up version of our 300W Monolith ampliier and boasts a 700VA transformer and 6 MOSFETS to deliver oustanding power and performance. The LAB12 drive unit fits perfectly both electricaly and physicaly into the Monolith system and offers the same tuneful deep bass of the standard Monlith whilst delivering the outstanding SPL levels.

The Amplifier:- We have years of experience in the manufacture of amplifiers from cinema amps for large cinema chains, PA amplifiers for the Disco and PA boys through to Hi-Fi and AV active sub units for some very respected OEM's. The new Monolith+ now boasts a 500W amplifier. The amplifier is a Mosfet design using "D" type lateral devices that are specifically made for audio use and are not to be confused with the switching types that can sound a bit harsh. The Mosfet design has a high slew rate and high damping factor and can be considered audiophile quality even when used as a full range amplifier, at sub bass frequencies the quality of the amplifier is exceptional. Fully featured, with High and Low level mixing capabilities, continuously variable phase control, variable frequency, Balanced XLR input, Low level gold plated RCA inputs and a gas tight Neutrik High level input make this sub easy to integrate with most equipment whether for Hi-Fi or AV use or even for both simultaneously.


The Monolith+ amplifier hand built by B.K. Electronics


The Cabinet:- Out of necessity the cabinet has to be large after all we are designing a high SPL and low distortion subwoofer. The cabinet has to be strong, rigid and not colour the sound. So, it's made from 25mm MDF and critically braced. The port has a 100mm internal diameter and is flared both ends to further eliminate port noise.

The Flared Port

The Superb Drive Unit Front

and Back



Drive Unit:- A 300mm / 12" twin magnet drive unit to increase linear excursion, a cast basket for a solid uncoloured projection of sound without ringing and vented pole piece to help reduce power compression

Specifications

System Type: 95 Litre reflex tuned to 20Hz, cabinet manufactured from veneered 25mm MDF and Critically braced

Distortion: 5% 102dB @ 20Hz

Frequency Response at -3dB: 20Hz / In Room at 15Hz

Amplifier Input / Output Impedance: High Level 100K - Low Level 10K - Balanced 10K

Gain Control Range: 80dB
Drive Unit Impedance: 4 Ohm
Mains Input: 230V / 50Hz

Dimensions: 420D X 604H x 540W

Weight: 48.0kg

Finishes: Black Ash Veneer, Light Oak Veneer and Cheery Veneer
Features

* 2 Years Warranty
* True 500W continuos discrete Mosfet amplifier
* Truly hand built in Great Britain, when we claim hand built we mean hand built, as there are no SMD components or other automatic placement devices.
* Downward Firing 300mm (12")
* Continuously variable frequency control
* Audiophile grade toroidal transformers
* Gas Tight Neutrik connection for long term consistency of sound quality
* Separate controls for high and low-level input adjustment
* Simultaneous connection of high and low level sources
* Balanced Inputs
* Thermal Protection
* Anti Thump
* ASP automatic speaker protection audibly transparent driver protection
* 6 x 16A output devices for effortless current control
* IEC Power Socket
* Doubled flared port for reduced port noise