En el manual:
7. RCA Phono Input Connection
This is the only method of signal input connection to the MRW-10. When using a stereo
amplifier system, connection can be provided by a pair of high-quality signal cables from the
pre-out section of an amplifier. If a digital AV processor or AV receiver/amplifier is to be used,
a single cable can be connected from the ‘sub out’ or LFE connection on the amplifier to the
RCA input connection on the MRW-10 labelled ‘R’. The RCA input marked ‘L’ in this case
will remain unused. Note: - cable lengths should not exceed 10 metres to avoid interference
from other electrical appliances.
Te ayuda??