NUEVO PopCorn VTen

a mi si ,no le doy mucha importancia

Nueva Beta 2 publicada hoy

[VTEN & VTEN-U] Beta 2 Firmware 01-05-160810-25-POP
Release Date: 10 August 2016

VTEN
Firmware version: 01-05-160810-25-POP-429-802
https://www.sendspace.com/file/5pea5g

VTEN-U
Firmware version: 01-05-160728-25-POP-429-802
https://www.sendspace.com/file/j9m4gd

Firmware Update Steps:
1. Unzip the downloaded file into the root directory of a USB thumb drive
2. Plug the USB thumb drive into USB port of VTEN/VTEN-U
3. Access to Setup->Maintenance in UI
4. Select Firmware Update and press Enter on the "Check For Firmware Update" button
5. If the file v10-update.bin/v10u-update.bin is found in the USB thumb drive, it will prompt for firmware update

Release Notes:
- Fixed MKV encounter crash when repeat playback issue
- Fixed unable to set device name without NMT app installed issue
- Fixed MKV audio menu show 'undetermined' for 'und' tag issue
- Fixed DVD show wrong elapsed time after seek and sometimes playback from beginning when perform 10% or 20% seek issue
- Fixed MKV encounter crash when manually turn on external text subtitle issue
- Fine tuned MMS prebuf and underrun buffer
- Fixed SMB share showing invalid login after removing username and password in edit share
- Adjust IR remote control responsiveness
- Enhanced handling for DVDLITE module


Beta 1 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73626 )
- Update to new kernel to support SSD formatting and MMC 5.0
- Optimized PGS subtitle rendering speed to support special PGS subtitle effect
- Fixed video with framerate 25fps output wrong tv mode when external video scaler turned on issue
- Added MMS Internet Radio support
- Fixed MP3 Internet Radio streaming issue
- Fixed for some APE playback cause framework crash and some APE with ID3 tag unable to start playback issue
- Fixed for APE with ID3 tag unable to get metadata info issue
- Fixed for some MKV VOBSUB unable to display subtitle issue
- Fixed for some SACD ISO unable to perform seek issue
- Added Genre and Channels info for get_current_aod_info API
- Added language indication for BD or DVD or MKV Audio menu switching
- Fixed for some DVD ISO encounter crash at starting of playback issue
- Fixed FLAC ID3 album art not displayed in Music Home issue
- Always show device name option at preference settings
- Fixed unable to save username or password when edit samba shared issue
- Added MKV audio default flag handling

Un saludo

No paran ni en agosto

[VTEN & VTEN-U] Beta 3 Firmware 01-05-160823-25-POP
Release Date: 23 August 2016

VTEN
Firmware version: 01-05-160823-25-POP-427-802
https://www.sendspace.com/file/upbur3

VTEN-U
Firmware version: 01-05-160823-25-POP-429-802
https://www.sendspace.com/file/qazyti

Firmware Update Steps:
1. Unzip the downloaded file into the root directory of a USB thumb drive
2. Plug the USB thumb drive into USB port of VTEN/VTEN-U
3. Access to Setup->Maintenance in UI
4. Select Firmware Update and press Enter on the "Check For Firmware Update" button
5. If the file v10-update.bin/v10u-update.bin is found in the USB thumb drive, it will prompt for firmware update

Release Notes:
- Fixed some DVDLITE has wrong sequence of audio streams issue
- Fixed some MKV PGS subtitle entries display too fast issue
- Fixed some MKV x264 playback has no video display issue
- Fixed some zlib compressed PGS subtitle stream unable to display properly issue
- Fixed APE version greater than 3.99 unable to start playback issue
- Fixed DVDLITE unable to go to the next chapter with info bar turn on issue
- Fixed showing exclamation mark and unable to display lite menu when select same DVDLITE title issue
- Fixed DVDLITE get video freeze forever after seek till end of the clip issue
- Fixed DVDLITE title menu subtitle selection issue
- Fixed some JPG crash in zoom transition issue

Beta 2 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73663 )
- Fixed MKV encounter crash when repeat playback issue
- Fixed unable to set device name without NMT app installed issue
- Fixed MKV audio menu show 'undetermined' for 'und' tag issue
- Fixed DVD show wrong elapsed time after seek and sometimes playback from beginning when perform 10% or 20% seek issue
- Fixed MKV encounter crash when manually turn on external text subtitle issue
- Fine tuned MMS prebuf and underrun buffer
- Fixed SMB share showing invalid login after removing username and password in edit share
- Adjust IR remote control responsiveness
- Enhanced handling for DVDLITE module


Beta 1 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73626 )
- Update to new kernel to support SSD formatting and MMC 5.0
- Optimized PGS subtitle rendering speed to support special PGS subtitle effect
- Fixed video with framerate 25fps output wrong tv mode when external video scaler turned on issue
- Added MMS Internet Radio support
- Fixed MP3 Internet Radio streaming issue
- Fixed for some APE playback cause framework crash and some APE with ID3 tag unable to start playback issue
- Fixed for APE with ID3 tag unable to get metadata info issue
- Fixed for some MKV VOBSUB unable to display subtitle issue
- Fixed for some SACD ISO unable to perform seek issue
- Added Genre and Channels info for get_current_aod_info API
- Added language indication for BD or DVD or MKV Audio menu switching
- Fixed for some DVD ISO encounter crash at starting of playback issue
- Fixed FLAC ID3 album art not displayed in Music Home issue
- Always show device name option at preference settings
- Fixed unable to save username or password when edit samba shared issue
- Added MKV audio default flag handling

Nueva Beta 4, después de un tiempo sin actualizaciones. El changelog es bastante interesante

[VTEN & VTEN-U] Beta 4 Firmware 01-05-160922-25-POP
Release Date: 23 Sept 2016

VTEN
Firmware version: 01-05-160922-25-POP-427-802
https://www.sendspace.com/file/bbmm6m

VTEN-U
Firmware version: 01-05-160922-25-POP-429-802
https://www.sendspace.com/file/u4xzub

Firmware Update Steps:
1. Unzip the downloaded file into the root directory of a USB thumb drive
2. Plug the USB thumb drive into USB port of VTEN/VTEN-U
3. Access to Setup->Maintenance in UI
4. Select Firmware Update and press Enter on the "Check For Firmware Update" button
5. If the file v10-update.bin/v10u-update.bin is found in the USB thumb drive, it will prompt for firmware update

Release Notes:
- Added support on Full DVD Navigation
- Fixed MKV which has forced subtitle unable to start playback if forced subtitle only option is selected
- Fixed certain MKV with SRT subtitle playback cause framework reboot issue
- Integrated new Sigma Designs SDK with playback engine and HDMI driver update

Beta 3 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73721 )
- Fixed some DVDLITE has wrong sequence of audio streams issue
- Fixed some MKV PGS subtitle entries display too fast issue
- Fixed some MKV x264 playback has no video display issue
- Fixed some zlib compressed PGS subtitle stream unable to display properly issue
- Fixed APE version greater than 3.99 unable to start playback issue
- Fixed DVDLITE unable to go to the next chapter with info bar turn on issue
- Fixed showing exclamation mark and unable to display lite menu when select same DVDLITE title issue
- Fixed DVDLITE get video freeze forever after seek till end of the clip issue
- Fixed DVDLITE title menu subtitle selection issue
- Fixed some JPG crash in zoom transition issue

Beta 2 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73663 )
- Fixed MKV encounter crash when repeat playback issue
- Fixed unable to set device name without NMT app installed issue
- Fixed MKV audio menu show 'undetermined' for 'und' tag issue
- Fixed DVD show wrong elapsed time after seek and sometimes playback from beginning when perform 10% or 20% seek issue
- Fixed MKV encounter crash when manually turn on external text subtitle issue
- Fine tuned MMS prebuf and underrun buffer
- Fixed SMB share showing invalid login after removing username and password in edit share
- Adjust IR remote control responsiveness
- Enhanced handling for DVDLITE module

Beta 1 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73626 )
- Update to new kernel to support SSD formatting and MMC 5.0
- Optimized PGS subtitle rendering speed to support special PGS subtitle effect
- Fixed video with framerate 25fps output wrong tv mode when external video scaler turned on issue
- Added MMS Internet Radio support
- Fixed MP3 Internet Radio streaming issue
- Fixed for some APE playback cause framework crash and some APE with ID3 tag unable to start playback issue
- Fixed for APE with ID3 tag unable to get metadata info issue
- Fixed for some MKV VOBSUB unable to display subtitle issue
- Fixed for some SACD ISO unable to perform seek issue
- Added Genre and Channels info for get_current_aod_info API
- Added language indication for BD or DVD or MKV Audio menu switching
- Fixed for some DVD ISO encounter crash at starting of playback issue
- Fixed FLAC ID3 album art not displayed in Music Home issue
- Always show device name option at preference settings
- Fixed unable to save username or password when edit samba shared issue
- Added MKV audio default flag handling

Yo desde que no pruebo betas y voy directo a la versión final me he olvidado de los problemas de inestabilidad con reinicios e historias,se agradece mucho el soporte continuo que le están dando al reproductor pero paso del tema beta tester que lo único que te trae son quebraderos de cabeza.

Nueva beta 5 que corrige un montón de errores

[VTEN & VTEN-U] Beta 5 Firmware 01-05-160929-25-POP
Release Date: 30 Sept 2016

VTEN
Firmware version: 01-05-160929-25-POP-427-802
https://www.sendspace.com/file/qnf2jj

VTEN-U
Firmware version: 01-05-160929-25-POP-429-802
https://www.sendspace.com/file/nu28dk

Firmware Update Steps:
1. Unzip the downloaded file into the root directory of a USB thumb drive
2. Plug the USB thumb drive into USB port of VTEN/VTEN-U
3. Access to Setup->Maintenance in UI
4. Select Firmware Update and press Enter on the "Check For Firmware Update" button
5. If the file v10-update.bin/v10u-update.bin is found in the USB thumb drive, it will prompt for firmware update

Release Notes:
- Fixed unable to access NMJ through file browser issue
- Fixed some DVD audio streams get wrong sample rate issue
- Fixed some DVD menu navigate to wrong sub menu issue
- Fixed DVD switch audio sometimes have no audio output issue
- Fixed some DVDLITE playback has no audio output issue
- Fixed some DVD still frame may encounter buffering issue
- Fixed DVD Audio unable to show highlight buttons issue
- Fixed some DVD Audio unable to start playback issue
- Fixed some DVD display wrong order of menu navigation when start playback issue
- Added language indicator on subtitle menu for DVD and MKV
- Fixed encounter framework reboot when playback corrupted DVD file issue
- Fixed filename with xml escaped symbol unable to start playback issue
- Fixed SACD ISO with unknown title or artist cause framework reboot when playback twice consequently issue
- Fixed certain MKV PGS with heavy animated effects cause buffering issue
- Fixed wrong chinese translation for subtitle track issue
- Fixed SRT with 'an9' tag causing framework reboot when adjust y position issue
- Added italic, bold, underline and color tag handling for SMI
- Fixed color tag unable to display properly for certain languages issue
- Fixed sometimes unable to retrieve weather information correctly in Setup Wizard issue
- Fixed MKV invoke closing PGS function in text base subtitle playback issue
- Force system to perform clean reboot instead of restart framework when framework crash

Note: 4K H.264 regression already fixed and will include into next build.

Beta 4 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73819 )
- Added support on Full DVD Navigation
- Fixed MKV which has forced subtitle unable to start playback if forced subtitle only option is selected
- Fixed certain MKV with SRT subtitle playback cause framework reboot issue
- Integrated new Sigma Designs SDK with playback engine and HDMI driver update

Beta 3 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73721 )
- Fixed some DVDLITE has wrong sequence of audio streams issue
- Fixed some MKV PGS subtitle entries display too fast issue
- Fixed some MKV x264 playback has no video display issue
- Fixed some zlib compressed PGS subtitle stream unable to display properly issue
- Fixed APE version greater than 3.99 unable to start playback issue
- Fixed DVDLITE unable to go to the next chapter with info bar turn on issue
- Fixed showing exclamation mark and unable to display lite menu when select same DVDLITE title issue
- Fixed DVDLITE get video freeze forever after seek till end of the clip issue
- Fixed DVDLITE title menu subtitle selection issue
- Fixed some JPG crash in zoom transition issue

Beta 2 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73663 )
- Fixed MKV encounter crash when repeat playback issue
- Fixed unable to set device name without NMT app installed issue
- Fixed MKV audio menu show 'undetermined' for 'und' tag issue
- Fixed DVD show wrong elapsed time after seek and sometimes playback from beginning when perform 10% or 20% seek issue
- Fixed MKV encounter crash when manually turn on external text subtitle issue
- Fine tuned MMS prebuf and underrun buffer
- Fixed SMB share showing invalid login after removing username and password in edit share
- Adjust IR remote control responsiveness
- Enhanced handling for DVDLITE module

Beta 1 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73626 )
- Update to new kernel to support SSD formatting and MMC 5.0
- Optimized PGS subtitle rendering speed to support special PGS subtitle effect
- Fixed video with framerate 25fps output wrong tv mode when external video scaler turned on issue
- Added MMS Internet Radio support
- Fixed MP3 Internet Radio streaming issue
- Fixed for some APE playback cause framework crash and some APE with ID3 tag unable to start playback issue
- Fixed for APE with ID3 tag unable to get metadata info issue
- Fixed for some MKV VOBSUB unable to display subtitle issue
- Fixed for some SACD ISO unable to perform seek issue
- Added Genre and Channels info for get_current_aod_info API
- Added language indication for BD or DVD or MKV Audio menu switching
- Fixed for some DVD ISO encounter crash at starting of playback issue
- Fixed FLAC ID3 album art not displayed in Music Home issue
- Always show device name option at preference settings
- Fixed unable to save username or password when edit samba shared issue
- Added MKV audio default flag handling

tiene muchas razon el amigo Esenachete, con beta 5, la mitad de las pelis en 4k, pixelan, incluso no se veían, he tenido que volver a beta 3 y todo perfecto para mi uso. tanbien agradecido por el gran trabajo que hacen, un saludo.

Iniciado por italian

tiene muchas razon el amigo Esenachete, con beta 5, la mitad de las pelis en 4k, pixelan, incluso no se veían, he tenido que volver a beta 3 y todo perfecto para mi uso. tanbien agradecido por el gran trabajo que hacen, un saludo.

Por lo que leo en el foro oficial están teniendo problemas ya que estas dos últimas betas llevan un nuevo SDK de Sigma con la nueva función (por fin) de habilitar la navegación completa de los menus de los DVD y parece que se les está atragantando un poco. De todas formas, como dices, chapó con el soporte que están dando a nuestro cacharrito.

Un saludo

Ya salió la RC 1

[VTEN & VTEN-U] RC 1 Firmware 01-05-161007-25-POP
Release Date: 7 Oct 2016

VTEN
Firmware version: 01-05-161007-25-POP-427-802
https://www.sendspace.com/file/0c831v

VTEN-U
Firmware version: 01-05-161007-25-POP-429-802
https://www.sendspace.com/file/fs1ts2

Firmware Update Steps:
1. Unzip the downloaded file into the root directory of a USB thumb drive
2. Plug the USB thumb drive into USB port of VTEN/VTEN-U
3. Access to Setup->Maintenance in UI
4. Select Firmware Update and press Enter on the "Check For Firmware Update" button
5. If the file v10-update.bin/v10u-update.bin is found in the USB thumb drive, it will prompt for firmware update

Release Notes:
- Fixed 4K H264 playback no video output issue
- Fixed certain MKV PGS unable to show subtitle issue
- Fixed some PGS subtitle entries display too fast issue
- Added bitrate changing info for BD, DVD and M2TS issue
- Added audio and subtitle language indicator for M2TS and bdlite
- Fixed some SRT has long subtitle entry showing extra empty lines after word wrapping handling issue
- Fixed MKV and MP4 encounter random crash when first start or stop playback issue
- Fixed some text based subtitle may cause framework crash issue
- Fixed 720p24 clip play in tvmode 720p60 instead of 1080p24 when external video scaler is on issue
- Fixed DVD without video_ts folder unable to start playback issue
- Fixed some DVD encounter video freeze when start playback issue
- Added support for DVD angle changing with Angle key
- Added support for DVD menu jumping with MENU key
- Fixed 3D BDISO unable to continue playback after iframe forward or backward issue
- Fixed UTF8 text subtitle display style at wrong segment position issue

Beta 5 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73831 )
- Fixed unable to access NMJ through file browser issue
- Fixed some DVD audio streams get wrong sample rate issue
- Fixed some DVD menu navigate to wrong sub menu issue
- Fixed DVD switch audio sometimes have no audio output issue
- Fixed some DVDLITE playback has no audio output issue
- Fixed some DVD still frame may encounter buffering issue
- Fixed DVD Audio unable to show highlight buttons issue
- Fixed some DVD Audio unable to start playback issue
- Fixed some DVD display wrong order of menu navigation when start playback issue
- Added language indicator on subtitle menu for DVD and MKV
- Fixed encounter framework reboot when playback corrupted DVD file issue
- Fixed filename with xml escaped symbol unable to start playback issue
- Fixed SACD ISO with unknown title or artist cause framework reboot when playback twice consequently issue
- Fixed certain MKV PGS with heavy animated effects cause buffering issue
- Fixed wrong chinese translation for subtitle track issue
- Fixed SRT with 'an9' tag causing framework reboot when adjust y position issue
- Added italic, bold, underline and color tag handling for SMI
- Fixed color tag unable to display properly for certain languages issue
- Fixed sometimes unable to retrieve weather information correctly in Setup Wizard issue
- Fixed MKV invoke closing PGS function in text base subtitle playback issue
- Force system to perform clean reboot instead of restart framework when framework crash

Beta 4 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73819 )
- Added support on Full DVD Navigation
- Fixed MKV which has forced subtitle unable to start playback if forced subtitle only option is selected
- Fixed certain MKV with SRT subtitle playback cause framework reboot issue
- Integrated new Sigma Designs SDK with playback engine and HDMI driver update

Beta 3 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73721 )
- Fixed some DVDLITE has wrong sequence of audio streams issue
- Fixed some MKV PGS subtitle entries display too fast issue
- Fixed some MKV x264 playback has no video display issue
- Fixed some zlib compressed PGS subtitle stream unable to display properly issue
- Fixed APE version greater than 3.99 unable to start playback issue
- Fixed DVDLITE unable to go to the next chapter with info bar turn on issue
- Fixed showing exclamation mark and unable to display lite menu when select same DVDLITE title issue
- Fixed DVDLITE get video freeze forever after seek till end of the clip issue
- Fixed DVDLITE title menu subtitle selection issue
- Fixed some JPG crash in zoom transition issue

Beta 2 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73663 )
- Fixed MKV encounter crash when repeat playback issue
- Fixed unable to set device name without NMT app installed issue
- Fixed MKV audio menu show 'undetermined' for 'und' tag issue
- Fixed DVD show wrong elapsed time after seek and sometimes playback from beginning when perform 10% or 20% seek issue
- Fixed MKV encounter crash when manually turn on external text subtitle issue
- Fine tuned MMS prebuf and underrun buffer
- Fixed SMB share showing invalid login after removing username and password in edit share
- Adjust IR remote control responsiveness
- Enhanced handling for DVDLITE module

Beta 1 Release Notes: ( http://www.networkedmediatank.com/showth...?tid=73626 )
- Update to new kernel to support SSD formatting and MMC 5.0
- Optimized PGS subtitle rendering speed to support special PGS subtitle effect
- Fixed video with framerate 25fps output wrong tv mode when external video scaler turned on issue
- Added MMS Internet Radio support
- Fixed MP3 Internet Radio streaming issue
- Fixed for some APE playback cause framework crash and some APE with ID3 tag unable to start playback issue
- Fixed for APE with ID3 tag unable to get metadata info issue
- Fixed for some MKV VOBSUB unable to display subtitle issue
- Fixed for some SACD ISO unable to perform seek issue
- Added Genre and Channels info for get_current_aod_info API
- Added language indication for BD or DVD or MKV Audio menu switching
- Fixed for some DVD ISO encounter crash at starting of playback issue
- Fixed FLAC ID3 album art not displayed in Music Home issue
- Always show device name option at preference settings
- Fixed unable to save username or password when edit samba shared issue
- Added MKV audio default flag handling

Un saludo

Tenemos RC 2 a la "venta"



VTEN
Firmware version: 01-05-161014-25-POP-427-802
https://www.sendspace.com/file/sl1op6

VTEN-U
Firmware version: 01-05-161014-25-POP-429-802
https://www.sendspace.com/file/0bksax


Firmware Update Steps:
1. Unzip the downloaded file into the root directory of a USB thumb drive
2. Plug the USB thumb drive into USB port of VTEN/VTEN-U
3. Access to Setup->Maintenance in UI
4. Select Firmware Update and press Enter on the "Check For Firmware Update" button
5. If the file v10-update.bin/v10u-update.bin is found in the USB thumb drive, it will prompt for firmware update

Release Notes:
- Fixed MKV MVC, 4K H.264 playback regression issues
- Changed GB2312 to GB18030, and improve text subtitle encoding handling
- Fixed some H264 MKV encounter wrong detection and unable to start playback issue
- Fixed some DVD Highlight Button unable to update automatically issue
- Fixed some DVD total duration not updated issue
- Fixed some DVD unable to execute internal button command automatically issue
- Fixed some DVD without root menu unable to start playback issue
- Fixed some DVD lost audio output when trigger next chapter issue
- Fixed SMB shortcut unable to take effect after reboot if Username and Password input with remote control issue

hola amigo Builli, perdona mi ignorancia, ¿ que significa ( RC ) ? muchas gracias.

Iniciado por italian

hola amigo Builli, perdona mi ignorancia, ¿ que significa ( RC ) ? muchas gracias.

Release Candidate. Que ha pasado ya de la fase beta y entra ya en casi casi final.

Un saludo

Iniciado por italian

hola amigo Builli, perdona, ¿ que significa ( RC ) ? muchas gracias.

Son versiones previas, con pequeños o ningún error, que van sacando antes de lanzar la versión definitiva del firmware.
Estas versiones están más avanzadas y con menos errores que las betas.

Iniciado por builli

Son versiones previas, con pequeños o ningún error, que van sacando antes de lanzar la versión definitiva del firmware.
Estas versiones están más avanzadas y con menos errores que las betas.

muchas gracias amigo por aclararme el significado de RC, un cordial saludo.