Whitebalance set on the B7 after whitepoint matching to the 500M.
Basicly Green color was too high on the B7 so i had to drop it -5
Any whitebalance or color differences here is due to the cameras metameric issues.
Both tvs looks identical now when watching them side by side.
And for the record here is a 100% white field
http://privat.bahnhof.se/wb192876/B7_...
This is in the same league as the 500M for uniformity
No color tints or banding just solid white screen.
Best i have seen on any tv i have tested in the last years for sure
5% IRE here from the service menu
http://privat.bahnhof.se/wb192876/B7%...
no banding or vignetting here just completely uniform
This B7 is assembled in Poland Europe
Build Date March 2017
Whitepoint matched settings to the 500M that i use now
125cd/m2 SDR
General/HDMI ULTRA HD Deep Colour ON for the HDMI input thats in use
PICTURE
Aspect Ratio Settings: 16:9
Just Scan ON
Energy Saving OFF
Picture Mode Settings: ISF Expert (Dark Room)
OLED LIGHT: 24
Contrast: 99
Brightness: 50
H Sharpness: 0
V Sharpness: 0
Colour: 50
Tint: 0
Expert Controls
Dynamic Contrast OFF
Super Resolution: OFF
Colour Gamut: Auto
Edge Enhancer: OFF
Colour Filter: OFF
Gamma: 2.2
White Balance
Colour Temperature: Warm2
Method: 2 Points
Pattern: Outer
Point High
Red 0
Green -6
Blue 0
Point Low
Red 1
Green 0
Blue 0
(Apply to all inputs)
Colour Management System (CMS)
Colour Red
Saturation 1
Tint 6
Luminance 1
Colour Green
Saturation 0
Tint 2
Luminance 3
Colour Blue
Saturation -1
Tint -1
Luminance 5
Colour Cyan
Saturation 4
Tint 2
Luminance 3
Colour Magenta
Saturation -2
Tint 4
Luminance 0
Colour Yellow
Saturation 1
Tint -6
Luminance 1
Picture Options
Noise Reduction OFF
MPEG Noise Reduction OFF
Black Level Low
Real Cinema On
Motion Eye Care Off
TruMotion User
De-Judder 0
De-Blur 0
(Apply to all inputs)
Tip: For smoothest motion with a PC and Blu Ray be sure to select 1080P 120Hz
for the first time Judder is now gone when playing 24P material