Si me lo permitís, aprovecho para actualizar y aclarar un punto que puede crear confusión. ESTA VERSIÓN INCORPORA TODAS LAS ACTUALIZACIONES DEL CDQ y PUEDE FUNCIONAR COMO PREVIO CONECTADO A UNA ETAPA DE POTENCIA O A MONITORES ACTIVOS.

Cuando lo compré pensaba que las salidas analógicas (RCA y XLR) eran fijas, pero en la página 16 de mi manual dice esto:

"CHANGING THE AUDIO OUTPUT LEVEL

The default audio output level is 2 volts (RCA output) which is adequate in the majority of cases. This level can be boosted by 3dB or made custom adjustable via the handset.

1) If you are using a passive pre-amplifier feeding a low-gain power amplifier the "+3 dB" setting could be useful.

2) The "Adjustable" setting enables you to conect the 8200CD directly to a power amplifier and control the output level via the remote handset (see Page 9).



Un poco más abajo, copio:

"IF YOU SELECT ADJUSTABLE:

After the 8200CD re-boots you will see the volume level at the right of the screen. Press the volumen +/- keys on the remote to alter the level. The mute key can also be used to mute/unmute the sound."

Para habilitar esta opción, hay que apagar el aparato, encenderlo mientras se mantiene pulsado el motón SEL, seleccionar la opción OUTPUT LEVEL con las teclas >>| y con las mismas teclas elegir ADJUSTABLE. Imagino que esta función sirve tanto para las salidas RCA como para las salidas XLR. Si alguien me lo pide, puedo comprobarlo porque tengo por aquí un cable XLR > RCA.

en la página 9 del manual dice que el volumen es ajustable desde el mando desde -80dB hasta +3dB. En la misma página dice: "Variable output mode should be enable only when the 8200CD is used as a standalone pre-amplifier, See p. 6".

Voy a la página 6:

"CONNECTING THE 8200CD TO A POWER AMPLIFIER

You can use the 8200CD as a stand-alone pre-amplifier by connecting the analogue outputs directly to the inputs of a power amplifier. The is no requiriment for the power amplifier to have a gain control as the level is controlled via the 8200CD handset."

Saludos