Cita Iniciado por Taboadax Ver mensaje
A sus órdenes señoría:


Como ves yo no hablo por hablar



Me gustaría ver la gráfica.



Tanto el JBL como el Dayton se simulan excursionando similar(en el caso del gto bastante mas para 104db), pero entiendes lo que te parece.

La nuke1000 es un churro. No es capaz de mover en bridge un gto hasta su límite sin clippar, pero eso no lo sabes tu porque no has probado ambos.


Ahora espero que te quede bien claro que yo no hablo por hablar, y vayas corriendo a corregir lo que has dicho de mi al BurgerKing.

Saludos
Si tiene más movimiento mecánico que el "coil- lenght-derived" es que tiene mayor Xmexch; no xmax

- Xmax - Maximum linear peak (or sometimes peak-to-peak) excursion (in mm) of the cone. Note that, because of mechanical issues, the motion of a driver cone becomes non-linear with large excursions, especially those in excess of this parameter.
-Xmax: Voice coil height minus top plate thickness, divided by 2

- Xmech - Maximum physical excursion of the driver before physical damage. With a sufficiently large electrical input, the excursion will cause damage to the voice coil or another moving part of the driver. In addition, arrangements for voice coil cooling (e.g., venting of the pole piece, or openings in the voice coil former above the coil itself, both allowing heat dissipation with air flow) will themselves change behaviors with large cone excursions.

La inuke puenteada en mono mueve perfectamente un sólo GTO1514


Un saludete