P+E Sony

Hola a todos:
Que impresion os da esta combinacion de previo + etapa de Sony,cuyos componentes de la clase ES son los siguientes:
previo Sony TAE 9000ES y etapa SONY TAN-9000ES.He aqui algunas de sus caracteristicas:

Spesifications and features
Dolby Digital decoding
Dolby Pro Logic Surround decoding
dts Digital Surround decoding
MPEG Multichannel decoding
Sony Digital Cinema Sound processing
Analog Devices SHARC 32-bit DSP processor
96/24 Crystal DIR (Digital Input Receiver)
Advanced Puse Conversion DACs with digital volume control
1 MB Flash Memory for easy firmware upgrades

--------------------------------------------------------------------------------

Rear panel
The Sony TA-E9000Es supports 5 audio source products and 6 video source products. The control amplifier supports both composite and s-video switching on all video product inputs.
Audio products: Phono, Tuner, CD, MD/DAT, Tape
Video products: Tv, DVD, LD, Video 1, Video 2, Video 3
Digital audio inputs: CD (optical/coax), MD/DAT (optical), TV (optical), DVD (optical/coax), LD (optical coax)
Digital audio outputs: MD/DAT (optical)
AC-3/RF input for Dolby Digital from LD
Analyzer/Mic input (not supported yet)
RS-232C connector for firmware upgrades
Video Processor in/out loop
Pre out: Front (left/right), Rear (left/right), center (2x) and subwoofer (2x)
6 Mode Configurable Amplifier
115 Watts per channel x5, 8 ohms or 4 ohms, 20-20 kHz, 0.013% THD
200 Watts per channel x2, 8 ohms, 1 kHz, 0.013% THD
Dedicated Pure Channel Audio Input
Operates 2,3,4,5 2 BTL and 2 BTL +1 Channel Modes enables you to match the TA-N9000ES to the amplifier you're using now
Parallel push-pull output 4 transistors per channel
FTC/UL 4-ohm/8-ohm rated lets you drive low-impedance speakers and "difficult" speakers with confidence
Direct Ground DriveTM Power Supply Circuitry
sf FinTM Heat Sink reduces resonance and vibration
Frame & Beam Construction reduces the spread of vibration inside the chassis for reduced microphonics in low level stages, purer sound
Inner Monocoque Chassis Construction separates mounted circuits from outer chassis
Control A1 Triggerable Standby Mode

Gracias. Saludos