Cita Iniciado por Keef Ver mensaje
Desde aquí creo que podrás descargarlo. No puedo comprobarlo porque no tengo un nº de serie de un Denon, pero todo pinta a que sí es posible:

Denon Firmware/Changelog Download
Gracias pero nop, me sale un .txt con el changelog:

Changelog of AVR3808A
27.04.2010
A2.04
Crackling noise on surround back speakers during playback of DTS-HD-MSTR 6.1 disc.

13.11.2009
A2.04
"No playback of HD-sat receiver after selects another source. If you switch on AVR with input e.g. SAT and HDMI is configured of HD-Sat receiver can you watch the HD-movie. If you toggle between Sat and another source is the HD-movie not visible."

14.10.2009
A2.04
AVR-3808A freezes while streaming audio via a network device after 2 hours.

18.08.2009
A2.04
After main power off/on, Parameter check [DISTANCE] shows SURR.BACK speaker instead of SUBWOOFER

13.03.2009
A2.02
Setting of Repeat mode and Random mode are not memorized after upgrade the unit.

27.10.2008
A2.01
If Volume of the unit is operated when the sound level changes from
""DIRECT mode"" to ""Another mode"" when ""DynamicEQ mode"" is selected,the level might become large.
When the input signal is changed while displaying the Audyssey Setting screen of MENU, the key might not be able to be operated"

15.10.2008
A1.97
Translation mistake in OSD language.
The GUI and OSD of the A/V amplifier doesn't operate correctly when the A/V amplifier is connected with "iPhone 3G".
Improvement of the Audyssey Dynamic Volume function. (For only PAY-Upgraded models.)
Cita Iniciado por heracles Ver mensaje
Hola nsx125,

Si con las instrucciones de Factory Reset no funciona, busca en internet, ya que a mi me ha ocurrido con un equipo Denon que el manual estaba equivocado, y tuve que buscar en internet la secuencia correcta para resetear el equipo.

La solución la encontré en la web de un foro alemán. Menos mal que el traductor automático de google y bing funcionan bastante bien.
Je, je.

Un saludo y suerte.
Joooder pues te puedes creer que gracias a lo que me has dicho he averiguado que lo estaba haciendo mal?

Me he ido a un foro aleman, y por decirlo de alguna manera, gracias a la manera de expresar el idioma he pillado que lo que era "power para mi" no era el botón que yo manipulaba. Lo he estado comparando con el manual y...

Resulta que yo, con la alimentación dada y estando el equipo en standby, pulsaba los botones "stand by" (para encenderlo) y los otros dos que pide a la vez, (mirando el aparato, no tiene un botón que se llame "power", tiene el de stand-by y el de on/off.

Me he mirado los dibujos del manual donde señala cada botoncito y le da un nombre y... Sí, el botón power es el general, el "on/off" y no el de stand-by...

Así que me voy a acostar de buen humor hoy, a faltas de probarlo. Como la actualización me acabará mañana (y estoy bastante seguro de que me dirá que ha fallado) probaré a hacerle el hard reset y a ver si se arregla todo por arte de magia (ojalá).