Here's the latest from mine
Picture Mode Custom
Brightness
Brightness 5
Contrast Max
Gamma -1 (results in measured gamma 2.3)
Black Level 50
Black Adjust Off
Adv. Contrast Enhancer Off
Auto Local Dimming Medium
Xtended Dynamic Range Off
Color
Color 50
Hue 0
Color Temperature Expert 1
Adv Color Temperature
R,G,B Gain Max, Max, -4
R,G,B Bias -2,0,-3
Live Color Off
Clarity
Sharpness 50
Reality Creation Off (set to your preference, this is most likely the advanced upscaling)
Random noise reduction Off (can soften picture)
Digital noise reduction Off (can soften picture)
Smooth Gradation Off (turn on if you see banding in, e.g. the sky in movies)
Motion
Motionflow Custom
Smoothness Min (avoids introducing SOE)
Clearness 1 (enables black frame insertion, for superb motion detail)
Cinemotion Low (turns on detection of 24fps content in 60hz signal)
Video Options
HDR Mode Auto
HDMI Video Range Auto
Color Space Auto
Spectral distribution
Gamut Coverage
100% DCI volume. Wow!
Note: Signal from htpc, rgb444 8bit 2160p60 signal. On the TV I set "color space" to rec2020. No other changes.
Maximum Light output
Not much to say here besides quoting another user on the forum that this TV is a "light cannon".
Note: HDR on, xdr high, local dimming medium, backlight max, contrast max
100% white 810nit
15% white 1314nit
1% white 2032nit
Native Contrast Ratio (using settings above and full fields)
Amazing native contrast, with local dimming on the picture takes on a superb dimensionality and lifelike 3d quality.
Native Contrast (Local dimming off)
Black 0.017
White 106
Contrast Ratio 6314
DSE Test
Barely any DSE to speak of, I can't see it in normal content.
Note: local dimming off
Smearing tests
Both tests were taken with my iphone6 using super slowmo video recording to try and capture any smearing which may be present.
motionflow custom, smoothness 0, clearness 1
motionflow truecinema
Near black uniformity
Excellent, basically perfect and no defects noticed in real content.
Blooming/haloing (local dimming medium)
The sweet spot is around 20-30 degrees. Sitting outside the sweet spot can cause black bars in movies to become a little brighter. Extreme angles are not great. Head on there is almost no blooming whatsoever.
Calibration measurements
Excellent results with minimal adjustments. You can download my full HCFR measurements file in the attachments below.
Out of the box performance
Factory reset to Cinema Pro mode, color temperature Expert 1. No other changes. White balance is on the cool side, causing higher de in grayscale, but otherwise the picture is quite good.
